—、產品說明 DESCRIPTION

聚丙烯酰胺的酰胺基可與許多物質親和、吸附形成氫鍵，相對高分子量聚丙烯酰胺在被吸附的離于間形成橋連，生成絮團，加速微粒沉降，從而達到固液分離的目的。

The amide group of polyacrylamide can have affinity with many substances and form hydrogen bonds by adsorption. Relatively high molecular weight polyacrylamide forms bridges between the adsorbed particles, forming flocs, accelerating the sedimentation of particles, so as to achieve the purpose of solid-liquid separation. .

二、應用范圍 APPLICATION

1、 污泥脫水、固液分離和洗煤、選礦及造紙廢水處理。

2、 工業廢水、城市生活污水處理。

3、 造紙工業：紙張的干濕強度，增加細小纖 維及填料的保留率。

4、 油田、地質勘探鉆井用泥漿材料的添加劑。

1. Sludge dewatering, solid-liquid separation, coal washing, ore dressing and papermaking wastewater treatment.

2. Treatment of industrial wastewater and urban domestic sewage.

3. Paper industry: The dry and wet strength of paper increases the retention rate of fine fibers and fillers.

4. Additives for mud materials used in oilfields and geological exploration drilling.

三、質量指標 QUALITY

備注：可根據客戶要求定做不同規格的產品。

Remarks: Products of different specifications can be customized according to customer requirements.

四、使用方法 INSTRUCTIONS

1、使用中性不含鹽類的水為宜，溶解時將產品均勻撒入攪拌的水中，適當加溫可加速溶解。

2、 使用前先通過實驗確定用量。

3、 對于污泥脫水通過小試確定的陽離子度。

1. It is advisable to use neutral salt-free water. Sprinkle the product evenly into the stirred water when dissolving. Proper heating can accelerate the dissolution.

2. Determine the dosage through experiments before use.

3. The cationic degree determined by a small test for sludge dewatering.

五、儲存和包裝 STORAGE&PACKAGING

1、 本產品有吸濕性，要密封存放在陰涼干燥處，避免受潮。固體產品要避免撒在地上，避免吸濕后使地變滑引起事故。

2、 本產品用聚丙烯編織袋包裝，內襯塑料袋或牛皮紙袋包裝，每袋凈重25KG或根據客戶要求包裝。

1. This product is hygroscopic, so it should be sealed and stored in a cool and dry place to avoid moisture. Solid products should not be scattered on the ground to avoid accidents caused by slipping the ground after absorbing moisture.

2. This product is packaged in polypropylene woven bags lined with plastic bags or kraft paper bags, each with a net weight of 25KG or according to customer requirements.